Introduction

Bash ** let** is a built-in command in Linux systems used for evaluating arithmetic expressions. Unlike other arithmetic evaluation and expansion commands,

**is a simple command with its own environment. The**

`let`

**command also allows for arithmetic expansion.**

`let`

**In this tutorial, we will go over the let command syntax, options, and usage examples.**

Prerequisites

- A system running a Linux distribution
- Access to the terminal window or command line

## Bash let Statement Syntax

The ** let** command uses the following basic syntax:

`let [expression]`

In the syntax above, ** expression** is an arithmetic expression you want the

**command to evaluate.**

`let`

**only works with expressions that contain integers. The command**

`let`

**does not support floating-point numerals**.

**Note:** When using the ** let** command, it is best to enclose individual expressions in double quotation marks (

**"**) to avoid any errors.

The ** let** command allows users to evaluate more than one expression simultaneously. In this case, the syntax is:

`let [expression 1] [expression 2] … [expression 3]`

## let Arithmetic Operators

The Bash ** let** command is able to evaluate expressions that contain the arithmetic operators from the table below. The entries are listed in the order of decreasing precedence, with the operators of the same precedence listed in the same row:

Operator | Description |

`var++` `var--` | Post-increment (++): Interpret the value of a variable and add 1 to it.Post-decrement (--): Interpret the value of a variable and subtract 1 from it. |

`++var` `--var` | Pre-increment (++): Add 1 to the value of a variable and then interpret the value.Pre-decrement (--): Subtract 1 from the value of a variable and then interpret the value. |

`-expr` `+expr` | Unary minus: Return the value of the expression multiplied by -1.Unary plus: Return the value of the expression unchanged (multiplied by 1). |

`!` `~` | Logical negation: Return false if the operand is true and true if the operand is false. Bitwise negation: Flip the bits in the binary representation of a number. |

`**` | Exponentiation: Raise one integer to the power of another. |

`*` /`%` | Basic arithmetic operators:Multiplication. Division. Remainder (modulo). |

`+` - | Basic arithmetic operators:Addition. Subtraction. |

`<< ` `>>` | Bitwise shift left.Bitwise shift right. |

`<=` `>=` `< ` `>` ` ` | Value comparison: Less than or equal to.Greater than or equal to. Less than. Greater than. |

`==` `!=` | Equality: Returns true if the operands are equal. Inequality: Returns false if the operands are equal. |

`&` | Bitwise AND: Multiplies the corresponding digits of two binary values. |

`^` | Bitwise XOR: Compares the corresponding digits of two binary values and returns 1 if the digits differ. |

`|` | Bitwise OR: Compares the corresponding digits of two binary values and returns 1 if either of the digits is a 1. |

`&&` | Logical AND: Returns true if both operands are true. |

`||` | Logical OR: Returns true if either of the operands is true. |

`expr1 ? expr2 : expr3` | Conditional operator: If expr1 is true, return expr2. If expr1 is false, return expr3. |

`=, *=, /=, %=, +=, -=, <<=, >>=, &=, ^=, |=` | Assignment: Assign a value to a variable. |

## Bash let Examples

The ** let** command lets you assign values to variables and perform arithmetic, bitwise, and logical operations. Read the sections below for examples.

### Assigning a Value to a Variable

Use the ** let** command to assign a value to a variable with:

`let "[variable] = [value]"`

**Note:** Learn more about assigning values to variables in our guide to environment variables in Linux.

For instance, assign the value of 5 to the variable **var1** and print out the value as the output:

`let "var1 = 5"; echo $var1`

Likewise, after setting a variable value, the ** let** command lets you assign the same value to another variable:

`let "var1 = 5" "var2=var1"; echo $var2`

### Performing Basic Arithmetic Operations

After setting variable values, use the ** let** command to perform basic arithmetic operations. For example, set

**var1**as 6 and

**var2**as 2 and perform addition, subtraction, multiplication, division, and modulus:

```
let "var1 = 6" "var2 = 2" "var3=var1+var2"; echo $var3
let "var1 = 6" "var2 = 2" "var3=var1-var2"; echo $var3
let "var1 = 6" "var2 = 2" "var3=var1*var2"; echo $var3
let "var1 = 6" "var2 = 2" "var3=var1/var2"; echo $var3
let "var1 = 6" "var2 = 2" "var3=var1%var2"; echo $var3
```

In this example, the ** let** command sets the value of

**var3**as the result of the arithmetic operation and prints out the result.

### Performing Exponentiation

The ** let** command requires two integer values to perform

**exponentiation**. The first value (

**) is raised to the power of the second value (**

`base`

**):**

`power`

`let "[base] ** [power]"`

For example, to raise the base value of 3 to the power of 2 and print the result, use this command:

`let "var1 = 3 ** 2"; echo $var1`

### Performing Unary Operations

Use a **unary minus** with the ** let** command to change an expression from positive to negative and vice versa:

`let "var1 = 2 + 3" "var1=-var1"; echo $var1`

The **unary plus** multiplies the expression by 1 and returns an unchanged value:

`let "var1 = 2 + 3" "var1=+var1"; echo $var1`

### Changing the Variable Value Incrementally

Using the **post-increment** or **post-decrement** operators interprets the variable value and then increases or decreases it by 1:

`let "var1 = 10" "var2=var1++"; echo $var1 $var2`

In the example above, the variable **var2** gets the value of **var1** (10) before it is increased by 1. The same happens when performing a post-decrement:

`let "var1 = 10" "var2=var1--"; echo $var1 $var2`

Performing a **pre-increment** increases the value of **var1** by 1 (11), then assigns the new value to **var2**:

`let "var1 = 10" "var2=++var1"; echo $var1 $var2`

Performing a **pre-decrement** does the same. However, this time it decreases the value of **var1** by 1 (9):

`let "var1 = 10" "var2=--var1"; echo $var1 $var2`

### Performing Bit Shifts

Performing **bit shifts** using the ** let** command shifts the order of the digits in a binary number to the left or right. For instance, performing a left bit shift of the number 8 twice multiplies it by two twice:

`let "var1 = 8 << 2"; echo $var1`

Conversely, performing a right bit shift twice divides the value by 2 twice:

`let "var1 = 8 >> 2"; echo $var1`

### Performing Bitwise Operations

A **bitwise negation** reverses each digit of a binary number. This operation changes 1 into 0 and vice versa:

`let "var1 = 5" "var2=~var1"; echo $var2`

In the example above, the let command converts the value of 5 to a 32-bit signed integer (00000000000000000000000000000101) and reverses the digits. This operation results in -6 (11111111111111111111111111111010).

A **bitwise AND** operator converts a pair of values into 32-bit signed integers and compares the digits in order. The action returns 1 if both digits are 1, or else it returns 0:

`let "var1 = 5" "var2 = 10" "var3 = var1&var2"; echo $var3`

The **bitwise OR** operator compares the corresponding digits of two values and returns 1. But, at least one of the bits must be 1:

`let "var1 = 5" "var2 = 10" "var3 = var1|var2"; echo $var3`

The **bitwise XOR** operator compares the corresponding digits of two values and returns 0 if the digits match. Otherwise, the operator returns 1:

`let "var1 = 5" "var2 = 10" "var3 = var1^var2"; echo $var3`

Conclusion

After reading this tutorial, you should know how to use the Bash ** let** command to evaluate arithmetic expressions in the Bash shell.

Next, learn more about essential Bash commands and their use cases, or find out how to write Bash scripts.